Chauvet Professional STRIKEARRAY2 Guide De Référence Rapide page 8

EN
Main Level
Fixture Hours
LED Hours
Information
Version
UID
LED1:
Temperature
LED2:
Only This
Unit
Update
Firmware
Multiple
Units
Factory
Reset
USB Software Update
The Strike Array 2 allows for software updates with a USB device using the built-in USB port. To update the software
using a USB flash drive, do the following:
1. Power on the fixture, and plug the flash drive into the USB port.
2. Once the flash drive has been detected, the message "Upgrade Firmware" will be displayed. Press <ENTER>.
• If a different message appears on the display, search for the updated software in the Main Menu (Update
Firmware). A list of the updated software files will be displayed.
3. Select the file that needs to be uploaded. The message "Are you sure?" will be displayed. Press <ENTER>.
4. If the selected file is correct, the upgrade will be completed. Restart the fixture.
• If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat
steps 1-3 using the correct file.
The .chl format file needs to be placed in the "STRIKE" folder in the USB flash drive.
7
QUICK REFERENCE GUIDE
Programming Levels
_ _ _ H
_ _ _ H
V_._
_ _ _ _ _ _ _ _ _ _ _ _
_ _°C
_ _ _ _ _ _.CHL
...
_ _ _ _ _ _.CHL
...
No
Yes
Description
Shows total hours the product has been powered on
Shows the total hours the LED lights have been on
Shows installed software version
Shows product UID
Individual pod temperature
Selects an update file for this product, or shows "No such
file!"
Selects an update file for this and connected products, or
shows "No such file!"
Reset to factory defaults
Strike Array 2 QRG Rev. 5