Introduction; Warranty Terms - MARTINS Industries Wheelifter 3473 Manuel

1. INTRODUCTION

Wheelifter 3473 is designed for the handling of the tire during the operations of assembly and
disassembly on the vehicle .Carefully read and follow the operating instructions in any work
situation, in order to avoid the damage and the risks deriving from the use of the equipment.
The Tire lifter Wheelifter 3473 is designed exclusively for lifting, lowering and transporting tires
for cars inside garages or tire replacement centers. The equipment should not be used in the
presence of explosive atmospheres .
Any use of the lift, which is not as specified in this manual is to be considered improper.
For a proper use of the equipment, it is recommended and it is considered necessary that
operator follows all instructions reported in this manual and that inspections and maintenance
are executed as set in the manual.
TECNOLUX s.r.l. will not be responsible in any way for damage or injury that are the
consequence of improper use of the equipment.

1.1. WARRANTY TERMS

Warranty terms are applied according to sale contract. The warranties and liability for personal
injury and / or material will expire if at least one of the following points occurs:
a) Misuse
b) Incorrect assembling
c) Maintenance and inspection of the equipment not correctly performed
d) The lift is used with protective devices that are not working or not properly installed
e) Instructions regarding the handling, assembly, maintenance and use are not followed
f) Parts subject to wear and / or deterioration are not replaced
g) Damage caused by agents and / or external causes or natural events
4
INSTRUCTIONS ORIGINALES