Controls And Use Instructions; Loading And Unloading - MARTINS Industries Wheelifter 3473 Manuel

4.2 CONTROLS AND USE INSTRUCTIONS

The commands to start the forks are placed under the handle
for the manual handling / transport of the lift.
To raise the forks press the white button in its upper part.
To lower the forks press the white button in its lower part.
When you release the button, the movement of the forks will
stop automatically.
If there are malfunctions immediately press the red
emergency button which will immediately stop the power
supply to the machine.

4.2.1 LOADING AND UNLOADING

Lower the forks until the inferior stop point.
Place the wheel so that the outer part of the metallic rim is
placed toward the operator side and rests against the oblique
roller.
Before giving the lifting command, make sure the wheel is
properly supported, is stable and cannot fall out easily.
Make sure that the wheel resting on the forks can rotate freely
without the rim can be damaged.
4.2.2 LOADING AND UNLOADING
Before moving the lift to transport the wheel, ensure that
there are no obstacles on the floor.
Transport the wheel only with the forks fully lowered.
Transport the wheel only on flat floors and stable
4.2.3 WHEEL LIFTING
ASCENT
To lift the forks press the white button in its upper part
During lifting make sure that the wheel and can not hurt
any obstacle
4.2.4 WHEEL LOWERING
11
INSTRUCTIONS ORIGINALES
DESCENT