5.1. CLEANING
Do not use pressure washers or high pressure cleaning systems
Use standard detergent and dry thoroughly after cleaning
5.2. POWER SUPPLY CABLE CONTROL
Check that the cable is in good condition and that there are no bare wires and plugs are intact.
5.3. WHEELS CHECK FOR TRANSPORT
Make sure that all the wheels move smoothly on their axis of rotation and the axis of orientation.
Check that the screws are tight
Check that the wheels do not present excessive wear.
5.4. EMERGENCY BUTTON CONTROL
Perform the following tests:
1) Operate the lift and test that it stops when you press the emergency button.
2) Repeat the operation for both the operation during up and down operation.
3) Press the emergency button and make sure that the lift doesn't respond to the command of
climb
4) Press the emergency button and make sure that the lift doesn't respond to the command of
descent.
14
INSTRUCTIONS ORIGINALES