Manual Mode; Program Mode - BH S5Ui Guide D'utilisation

1. MANUAL MODE

User may preset their own resistance level from 1 to 24 by pressing the UP/DOWN buttons.
The default resistance level is 1. Press ENTER to confirm. Using the UP/DOWN buttons
enter values for TIME, DISTANCE, CALORIES, PULSE, and then press START to begin
your workout.

2. PROGRAM MODE

There are 12 preset programs. Use the UP/DOWN buttons to select the desired program
profile, then press the ENTER button to confirm. Use the UP/DOWN buttons to adjust
the resistance level. Press ENTER to confirm. Enter values for TIME, DISTANCE,
CALORIES, PULSE, and then press START/STOP to begin your workout.
3. FITNESS TEST
Use the UP/DOWN buttons to select FITNESS and press ENTER. Press START/STOP
to start the test. The user has to achieve the greatest distance possible in 8 minutes. When
the time is up, the electronic device will work out the difference and your fitness rating will
be displayed up on the screen: «F1, F2,..., F5, F6»; where «F1» is the best «Excellent» and
«F6» the worst «Very Poor».
4. PERSONAL MODE
Users may create their own profile in this mode. The first segment of the profile will start
blinking. Use the UP/DOWN buttons to adjust resistance level for each segment. Once all
16 segments have been entered press the ENTER button to confirm. Press START/STOP
to begin your workout.
5. WATT CONTROL MODE
Enter values for TIME, DISTANCE, CALORIES, PULSE, and then press START/STOP
to begin your workout. User may set the Watt value by pressing the UP/DOWN buttons to
change in 10 Watt increments.
6. HRC MODE
Input personal data: SEX, AGE, HEIGHT and WEIGHT.
User may select different target Heart Rate from 55%, 75%, 90% and TARGET by using the
UP/DOWN buttons. Press ENTER to confirm. Then, enter values for TIME, DISTANCE,
CALORIES, and then press START/STOP to begin your workout.
7. RANDOM MODE
Use the UP/DOWN buttons to select the RANDOM function and press ENTER. Input
24