Filling The Water Tank - Krups EA9000 Serie Mode D'emploi

The machine prompts you to fill the bean container although there are beans in it: Some types of
n
coffee can interfere with optical sensors; you must shake the beans with your hand to make the function
operational once again.
The machine detects oily beans, but the coffee dispensed is weak/too light: Some beans (especially
n
those that are too large or too oily) do not easily go into the grinder. Use your hand to ease them into the
grinder (make sure machine is off) and/or change the type of coffee beans.
The machine does not detect the absence of coffee beans: Check that a bean is not obstructing the
n
optical sensors. Otherwise, the function is not operational.
!
Caution: Never put ground coffee or water into the coffee bean container.
Ensure that no foreign objects (e.g. small stones, hard wood) get into the coffee bean
container as they could damage the grinder (not covered by the guarantee).
Danger: Any contact of the conductive parts of the appliance with humidity or water may lead to fatal
injuries due to the presence of electricity!
n

Filling the water tank

Open the right door.
The machine prompts you to fill the tank with water although there is water in it: Caution: The
n
machine includes a mechanism that manages the water level required for the requested recipe. It is
therefore normal that the water level is not always the same in the tank when there is a request to fill it.
The machine does not detect my tank: Please check whether the tank has been inserted fully (until
n
you feel resistance).
! Caution: Only put water in the tank!
1
2
Lift and pull the water
tank towards you.
Fill the tank.
Replace the tank.
ENGLISH
13