Material Provided/ Tools Required - Procopi Delta EVODECK EC Notice D'installation Et De Maintenance

III. MATERIALS PROVIDED/ TOOLS REQUIRED
The materials are delivered in 1 box containing:
ƒ
1 axle
ƒ
1 package containing the cover stands, screws and fittings
ƒ
1 package containing the flanges
ƒ
1 slat apron
EVODECK EC
1 Axle
1 Set of flanges for Evodeck EC
1 Set of casings for Evodeck EC
4 Self-tapping screws 4.2x13 A2 DIN7504 K (casings)
9 Countersunk hex screws 6x20 A4 DIN7991 (fix the
axle on the side opposite the motor)
6 Long dog point headless hex screw M10-20 A2
(adjust flange)
4 Express studs D10x124 A4 (attach the flange)
1 Floating key chain for the Delta cover
TOOLS REQUIRED
ƒ
1 socket wrench no 8 (earth terminal nut)
ƒ
1 socket wrench no 7 (casing screws)
ƒ
1 Allen key no. 4 (countersunk hex screws)
ƒ
1 Allen key no. 5 (headless hex screws)
ƒ
1 spanner 17 (studs)
ƒ
1 Ø10mm drill bit (studs)
ƒ
1 flat head screw driver 5 (connection box + fuse
contacts)
ƒ
1 measuring tape, 2 m
ƒ
1 spirit level
ƒ
1 percussion drill
ƒ
1 grinder with diamond disk
ƒ
1 mallet or hammer
ƒ
1 crimping pliers for the electrical lugs
MATERIAL PROVIDED
1 Axle
1 Set of flages for Evodeck EM
1 Set of casings for Evodeck EM
4 Self-tapping screws 4/2x13 A2 DIN7504 K (casings)
9 Countersunk hex screws 6x20 A4 DIN7991
6 Long dog point headless hex screw M10-20 A2
4 Expresss studs D10x124 A4
1 Floating key chain for the Delta cover
TIME REQUIRED FOR INSTALLATION
ƒ
Mechanical assembly + slat apron: approximately
3 hours (if the electrical cable for the EC version
has already been run).
ƒ
Mechanical assembly only: approximately 1 hour.
NUMBER OF PEOPLE
ƒ
Two people to carry the axle to the swimming
pool.
ƒ
One person for the rest of the assembly/
installation.
EVODECK EM
2016/01 - Indice de révision : D - Code : 35101
21/32