Operation - Cub Cadet BC280 Manuel De L'opérateur

Taille-bordure debroussailleuse a 2 temps
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HOLDING THE UNIT
WARNING:
Always wear eye, hearing, hand, foot and
body protection to reduce the risk of injury when operating
this unit.
Stand in the operating position (Fig. 13). Stand up straight. Do
not bend over.
Keep feet apart and firmly planted.
Hold the shaft grip with the right hand. Keep the right arm
slightly bent.
Hold the handle with the left hand. Keep the left arm straight.
Hold the unit at waist level.
Position the cutting head / blade a few inches above the ground.
TIPS FOR BEST RESULTS (AS A TRIMMER)
To direct clippings away from the operator, tilt the cutting head
slightly down to the right; cut from left to right whenever possible.
Do not trim wet grass or weeds.
NOTE: Some line breakage will occur from:
• Entanglement with foreign matter
• Normal line fatigue
• Attempting to cut thick vegetation
• Forcing the line into objects such as walls or fence posts
DECORATIVE TRIMMING (AS A TRIMMER)
When trimming around trees, posts, fences, etc., rotate the whole
unit so that the cutting head is at a 30° angle to the ground (Fig. 14).

OPERATION

12
Fig. 13
Fig. 14

Publicité

Table des Matières
loading

Table des Matières