Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Important Safe Operation Practices
WARNING:
could endanger the personal safety and/or property of yourself and others. Read and follow
all instructions in this manual before attempting to operate this product. Failure to comply
with these instructions may result in personal injury.
When you see this symbol. HEED ITS WARNING!
WARNING! This product contains a chemical(s) known to the State of California to cause
cancer, birth defects or other reproductive harm.
General Operation
1.
Read this Operator's Manual completely before starting the
product. Study the controls and learn the proper sequence
of operation. Retain Operator's Manual in a safe place for
future reference.
2.
Do not allow anyone to operate or maintain this product
who has not read the manual.
3.
Do not remove any shields, guards, decals or safety devices.
If a shield, guard, decal or safety device is damaged or
does not function, repair or replace it before operating the
product.
4.
Make certain the sprayer is securely fastened to the frame
of the tractor.
5.
When spraying pesticides:
a.
ALWAYS FOLLOW THE DIRECTIONS ON THE LABEL
b.
Avoid breathing vapors.
c.
Avoid contact with skin, eyes or clothing.
d.
Wear rubber boots or rubberized shoes.
e.
Wear work clothes with long-sleeved shirts and
long-legged pants.
f.
Change to clean clothing daily.
g.
Wash hands and face before eating or smoking.
h.
Bathe thoroughly as soon after spraying as possible.
6.
Wear a face shield and rubber gloves when handling
concentrates.
7.
Always wear safety glasses, long pants and safety shoes
when operating or maintaining this unit. Do not wear
loose-fitting clothing.
This symbol points out important safety instructions which, if not followed,
CALIFORNIA PROPOSITION 65
8.
To avoid serious burns, do not touch the engine or muffler
while the engine is running or until it has cooled for at least
30 minutes after it has been shut off.
9.
Keep adults, children and pets away from the sprayer and
the area to be sprayed.
10.
Spray only in daylight.
11.
Always check the area to be sprayed and remove debris
and other objects prior to spraying.
12.
Keep the product and especially the engine/pump area
clean and free of grease, grass and leaves to reduce the
potential for over heating and fire.
Service
General Service
1.
Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
2.
For safety protection, frequently check components
and replace immediately with original equipment
manufacturer's (O.E.M.) parts only, listed in this manual.
"Use of parts which do not meet the original equipment
specifications may lead to improper performance and
compromise safety!"
3.
Maintain or replace safety and instruction labels, as
necessary.
4.
Observe proper disposal laws and regulations for
chemicals, gas, oil, etc. to protect the environment.
2
3
Publicité
Chapitres
Table des Matières
