Rittal 7979.711 Notice D'installation Et D'utilisation page 30

RCM master/slave mode

If the display is switched off: Press any key. A menu will appear
EN
showing the power per phase.

Press the "Esc" key (fig. 5, item 2) to display the Rittal main
menu.

Navigate to the PDU Mode menu via the Setup menu. After
selecting the PDU Mode menu, you will be asked to confirm
with the security PIN. Please follow the instructions in sec-
tion 6.1 on entering the PIN code.

After entering the security PIN (where applicable), you can then
select the operating mode (e.g. Master) from the PDU Mode
menu.
30 Rittal RCM Inline Meter