Rittal 7979.711 Notice D'installation Et D'utilisation page 25

6.1 Settings via the display

If the display is dark: Press any key. A menu will appear show-
ing the power per phase.

Press the "Esc" key (fig. 5, item 2) to display the Rittal main
menu.

Select the "Setup" entry and press the "Enter" key to confirm
your selection (fig. 5, item 1).

Select the "IP Configuration" entry and press the "Enter" key to
confirm your selection. The menu for entering your security PIN
will appear.

Keep pressing the "Up" key (fig. 5, item 5) or the "Down" key
(fig. 5, item 4), until the required digit is displayed in the first po-
sition of the PIN.

Press the "Enter" key to move to the second position of the
PIN.
Rittal RCM Inline Meter
Settings of the RCM
25
EN