General Specifications - PANCONTROL PAN 200A+ Manuel D'instructions

- Hz Frequency measurement
- A AC Current measurement
- V DC Voltage measurement / AC Voltage measurement
- NCV Non Contact Voltage tester (NCV) active
- OL Overload indicator
This device does not use all the symbols shown in the image.

7. General Specifications

Display
Overload indicator
Polarity
Measuring rate
Category
max. voltage to earth
Continuity test
Auto power off
Power supply
Operating temperatute
Temperature coefficient
Altitude
Storage temperature
Recalibration
LCD with Backlight
3 3/4 Digits (to 5999)
OL
automatically (minus sign for negative
polarity)
3x / Second(s)
CAT III 600 V
600 V
If the resistance is less than about 50 Ω,
you hear an audible signal. If the circuit is
open, the display shows "OL".
ca. 10 Min.
2 x 1,5 V (AAA Battery(s))
18 - 28°C (64 - 82°F) / <75% Humidity
< 0,1 x Accuracy / °C
max. 2000 m
-10 - 50°C (14 - 122°F) (Remove the battery
if Humidity >80%)
1 x yearly (under Operating temperatute)
22
English