Safety Instructions - PANCONTROL PAN 200A+ Manuel D'instructions

3. Safety Instructions

To ensure the safe use of the device, please follow all the safety and operating
instructions given in this manual.
 Before using the device, make sure that test leads and the device are in good
condition and the device is working properly (e.g. by connecting to known
voltage sources).
 The device may not be used if the housing or the test leads are damaged, if
one or more functions are not working, if functions are not displayed, or if you
suspect that something is wrong.
 If the safety of the user cannot be guaranteed, the device may not be operated
and secured against use.
 While using this device, hold the test leads only behind the finger guards - do
not touch the probes.
 Never ground yourself while making electrical measurements. Do not touch
any exposed metal pipes, fittings etc., which could have a ground potential.
Ensure that your body is isolated by using dry clothes, rubber shoes, rubber
mats or other approved insulation materials.
 Operate the device in a way that it is not difficult to operate the network
separators.
 Never connect the device to voltage or current sources that exceed the
specified maximum values.
 If the battery symbol appears in the display, replace the battery immediately.
 Always switch off the appliance and remove the test leads from all voltage
sources before opening the device to exchange the battery or the fuse.
 Never use the device with the rear cover removed or with the battery and fuse
compartment open!
 Do not use the device near strong magnetic fields (for e.g. welding
transformer), as this can distort the display.
 Do not use the device outdoors, in humid surroundings or in environments
that are subjected to extreme temperature fluctuations.
19
English