Console Overview; Power On/Off - BH BLADEZ Master Mag Guide D'utilisation

CONSOLE OVERVIEW

Register your product warranty online at: www.BHFitnessUSA.com
TM
Questions regarding warranty and parts call: 636.634.2217
GENERAL:
This console has an LCD screen which displays; Speed,
RPM, Calories, Distance, Time and Pulse (optional).

POWER ON/OFF

The display will show all data upon pedaling. Once
pedaling stops, the LCD will blink, displaying the latest
data before pedaling stopped. The display will turn off
once pedaling has stopped for over 45 seconds.
MILES/KILOMETER SETTINGS
To change Mile/Kilometer setting please follow the steps
below:
1. Remove the back of the console
2. Remove the batteries
3. Locate the two small switches in the back of the
console
4. When switch "1" is set to the "ON" position, the unit is
in miles
5. To change to Kilometers flip the "2" switch to "ON"
and the "1" switch is "OFF" (or opposite to the "1"
switch)
6. Replace batteries
7. Replace back of console
DISPLAY DATA
1. SPEED - Located on top of the LCD display. Shows
current speed with pointer.
2. TIME - Shows total time of the workout. Range:
00:00~99:59 minutes.
3. RPM - Revolutions Per Minute. Range: 0~140. If
RPM exceeds 140, LCD will show "STOP" as a safety
reminder.
4. CALORIES - Shows calories consumed during workout.
Range: 000.0~999.9.
5. DISTANCE - Range: 0~999.9; Change increment: 0.1
miles.
6. PULSE - When using a compatible wireless heart rate
chest strap, the bottom of the LCD will show heart rate
(chest strap not included). Range: 60~ 240 BPM.
19