BH BLADEZ Master Mag Guide D'utilisation page 12

STEP 1
ATTACH FRONT AND REAR STABILIZERS
Remove the shipping supports (metal tubes attached with 2 screws) -under the front and rear
stabilizers with supplied Allen wrench. Discard the supports and screws.
Attach the front stabilizer (8) and rear stabilizer (7) under the main frame (1) with 4 button
head hex socket bolts (34) and 4 flat washers (33) using the supplied Allen wrench. (Figure 1.)
STEP 2
ATTACH THE ANTI-PERSPIRATION COVER
Remove the 4 Philips screws (87) from the frame and attach the anti-perspiration
cover (88) to frame with the same Philips screws using supplied combination wrench/
screwdriver. (Figure 2.)
Register your product warranty online at: www.BHFitnessUSA.com
12
Questions regarding warranty and parts call: 636.634.2217
ASSEMBLY INSTRUCTIONS
Figure 1
Figure 2
TM