BH BLADEZ Master Mag Guide D'utilisation page 15

STEP 7
INSTALL THE SEAT
Loosen the pop pin (23) and then pull down on the pop pin to insert the seat slider (3)
into the seat post (2.) Re-tighten the pop pin. Install the seat (22) onto the seat slider and
tighten seat clamp with provided 13mm wrench. (Figure 7.)
STEP 8
INSTALL THE CONSOLE
Remove the 2 Philips screws (72) from handle
bar then install the console mount (81) onto the
handlebar (5) with the same 2 Philips screws.
Remove the battery cover off of the computer
console (80) and insert included batteries.
Reinstall battery cover. Remove the Phillips
screw (82) on the back of the computer and
slide the computer onto the computer mount.
Secure the computer console to the computer
mount using previously removed Philips
screw. Connect the upper sensor cable (83)
to the back of the computer. (Figure 8.)
TM
ASSEMBLY INSTRUCTIONS
Register your product warranty online at: www.BHFitnessUSA.com
Questions regarding warranty and parts call: 636.634.2217
Figure 7
Figure 8
15