Care And Maintenance - Klarstein OLIVIA Mode D'emploi

CARE AND MAINTENANCE

1. Please wash the machine in case of residue going bad.
2. Take the hopper away, move the cavity lock
buckle to specify position (refer to printed guiding
direction on top lid).
3. Rotate the cavity to the biggest angle.
(Note: Do not place your fingers on the
cavity to avoid injury and keep children
away.)
4. Pull out the cavity parts and pressing shaft,
clean it with soft dry towel.
Note: Do not use corrosive scour.
5. Please clean the cavity, lock buckle and residue in time with attached tool.
6. Please set the pressing shaft first then cavity, make the cavity buckle lock the parts
refer to the guiding note on the top lid, rotate the cavity protection cover off.
EN
19