Maintenance And Service; Battery Maintenance - Garland ROLL&COMB 302 W-V20 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

7. MAINTENANCE AND SERVICE

The removal of the security measures, an
inappropriate maintenance, the substitution of parts
by non original spare parts and accessories could
result in severe body harm.
Always perform maintenance or service
with the machine unplugged from the
battery. Disconnect the battery before
performing any operation on the machine. Read the
instruction manual before performing any operation
on the machine.
Carry out periodic checks on the machine to
ensure its correct functioning. For a complete check
up, we recommend you take the machine to your after
sales dealer.
Keep the machine clean, specially the engine air
vents.
7.1. CLEANING
Clean the comber with a damp cloth. Never use water,
petrol or other liquids when cleaning the machine.
You can use water on the catcher as long as you
separate the catcher from the machine at a distance
from the machine. Dry the catcher completely before
placing again on the machine.

7.2. BATTERY MAINTENANCE

The battery supplied with this tool does not
maintenance required. It is not necessary to add water
or acid to the battery.
Like all rechargeable batteries, after of years of use, it
will be necessary replace it
7.2.1. CHARGER
Periodically inspect the charger cable
looking for possible damages. If the cable is damaged
Do not use the charger and take it to your technical
service repair.
Keep the charger clean, especially the battery
connections. Dirt can cause electric shock and / or
fire.
29/84
English

Publicité

Table des Matières
loading

Table des Matières