Pattfield Ergo Tools PE-EBH 7530 Mode D'emploi page 219

Keep the underside of the machine clean and remove soil deposits.
Deposits make it more diffi cult to start the machine and decrease the
working depth. Work perpendicular to the slop on inclined areas. The
machine must be switched off and the mains cable disconnected be-
fore you make any checks on the hoe blades.
Prior to sowing, we recommend one of the methods of preparation as
shown in Figure 14.
Method A:
First hoe the ground row by row, then carry out the hoeing a second
time but at an angle of 90 degrees.
Method B:
First hoe the ground row by row, then carry out the hoeing a second
time but with overlapping paths.
Warning!
The hoe blades will continue to rotate for a few seconds after the mo-
tor is switched off . Never attempt to manually stop them. In the event
that the rotating hoe blade strikes an object, immediately switch off
the machine and wait for the hoe blades to come to a complete stop.
Then inspect the condition of the hoe blades. Replace any parts that
are damaged.
Lay the power cable on the ground in front of the outlet in a fi gure 8.
Work away from the outlet or cable and ensure that the power cable
always trails in the hoed soil which will prevent the hoe blades from
traveling over the cable.
Anl_PE_EBH_7530_SPK7.indb 219 Anl_PE_EBH_7530_SPK7.indb 219
- 219 -
GB
21.08.15 09:02 21.08.15 09:02