Maintenance And Storage - Pattfield Ergo Tools PE-EBH 7530 Mode D'emploi

•
Be particularly careful when you turn the machine around or pull it
toward yourself.
•
Switch on the motor carefully as described in the instructions from
the manufacturer and ensure that you keep your feet at a safe dis-
tance from the tool.
•
Never move your hands or feet toward or under any rotating parts.
•
Never lift or carry a machine whilst the motor is running; in additi-
on the power plug should be pulled.
•
Switch off the motor whenever you leave the machine unattended.
•
If the machine begins to experience unusual vibrations, immedia-
tely switch it off and check it.
•
Ensure that you avoid paths that could restrict the free movement
of the extension cable.
•
Keep cables away from the cutters. The cutters may cause dama-
ge to the cables and result in contact with active parts.

Maintenance and storage

•
Always make sure that all nuts, bolts and screws are tightened se-
curely so that the machine is in safe working condition.
•
Allow the motor to cool before you put the machine in an enclosed
area.
•
For your own safety, replace worn or damaged parts without delay.
•
Switch the machine off and pull the power plug before carrying out
any adjustment or cleaning work on it, and before checking to see
if the mains connection is entwined or damaged.
•
Switch off the motor and pull the power plug:
- before you dislodge any blockages or clogs.
- before you clean the machine, inspect it or carry out work on the
machine.
- after you have traveled over an obstacle.
- if you have struck a foreign object.
- if the equipment begins to experience exceptionally strong vibra-
tions
Anl_PE_EBH_7530_SPK7.indb 211 Anl_PE_EBH_7530_SPK7.indb 211
- 211 -
GB
21.08.15 09:02 21.08.15 09:02