Setting The Maximum Power-On Volume (Onvol) - Bosch DAF Radio Basic Mode D'emploi Et De Montage

Volume
u Press the MENU button ⑤ repeatedly
until "BEEP" and the current setting ("ON"
or "OFF") appear in the display ④.
u Turn the volume control ① anticlockwise
or clockwise to deactivate or activate the
confirmation beep.
To close the menu,
u press the MENU button ⑤ (if necessary,
several times).
Setting the maximum power-on
volume (ONVOL)
When you switch on the device, it plays at the
volume that was set last. However, if before
switching off you set the volume to a level that
is higher than the maximum power-on volume,
the system will automatically turn the volume
down to the configured power-on volume level
when you switch the device back on.
Note:
To protect your hearing, the maxi-
mum power-on volume is limited to a
value of 25.
u Press the MENU button ⑤ to open the
menu.
u Press the MENU button ⑤ repeatedly
until "ONVOL" and the current setting
appear in the display ④.
u Turn the volume control ① anticlockwise
or clockwise to set the power-on volume
to a setting between 5 and 25.
Note:
Robert Bosch Car Multimedia GmbH
You do not have to wait for the
current setting to be displayed in
order for you to be able to change it
by turning the volume control ①.
To close the menu,
u press the MENU button ⑤ (if necessary,
several times).
7 620 000 111/ 7 620 002 112 | 12.2019
en | 33