34 | en
Sound
Adjusting the bass (BASS)
u Press the AUD button ⑦ to open the
menu.
u Press the AUD button ⑦ repeatedly until
"BASS" and the current setting are
displayed.
u Turn the volume control ① anticlockwise
or clockwise to set the level to a setting
between –7 and +7.
To close the menu,
u press the AUD button ⑦ (if necessary,
several times).
Adjusting the treble (TREB)
u Press the AUD button ⑦ to open the
menu.
u Press the AUD button ⑦ repeatedly until
"TREB" and the current setting are
displayed.
u Turn the volume control ① anticlockwise
or clockwise to set the level to a setting
between –7 and +7.
To close the menu,
u press the AUD button ⑦ (if necessary,
several times).
Adjusting the left/right volume bal-
ance (BAL)
u Press the AUD button ⑦ to open the
menu.
u Press the AUD button ⑦ repeatedly until
"BAL" and the current setting appear in
the display ④.
7 620 000 111/ 7 620 002 112 | 12.2019
u Turn the volume control ① anticlockwise
or clockwise to set the volume balance to
a setting between +10 and –10.
To close the menu,
u press the AUD button ⑦ (if necessary,
several times).
Switching loudness on/off (LD)
The loudness function automatically boosts the
bass at low volume levels.
u Press the AUD button ⑦ to open the
menu.
u Press the AUD button ⑦ repeatedly until
"LD" and the current setting ("ON" or
"OFF") appear in the display ④.
u Turn the volume control ① anticlockwise
or clockwise to deactivate or activate
loudness.
To close the menu,
u press the AUD button ⑦ (if necessary,
several times).
Adjusting the front/rear volume
fader (FAD, only DAF RADIO
LUXURY)
u Press the AUD button ⑦ to open the
menu.
u Press the AUD button ⑦ repeatedly until
"FAD" and the current setting are
displayed.
u Turn the volume control ① anticlockwise
or clockwise to set the volume fader to a
setting between –10 and +10.
To close the menu,
u press the AUD button ⑦ (if necessary,
several times).
Robert Bosch Car Multimedia GmbH
Sound