Krups EA86 Manuel D'utilisation page 34

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
PREPARING LATTE RECIPES
We advise that you use very fresh, very cold pasteurised milk or UHT milk. The use of unpasteurised milk does not
yield optimal results.
You may pause the cycle by pressing STOP.
WARNING, THE CYCLE DOES NOT STOP IMMEDIATELY.
Preparing and installing the milk pot on the machine
The milk pot is comprised of a plastic container, a cover (including a cartridge) and a flexible pipe connecting it to the
machine's drinks spout. Prior to first use, carefully clean the various components.
Pour the milk in the pot (minimum 150 ml). Put the cover on the pot by screwing it in with a slight pressure (11). Lift
the locking lever (12). Install the milk pot on the machine by connecting it to the steam outlet (13) and then lower the
locking lever (14). Insert the flexible pipe in the opening of the cartridge provided for that purpose (15) and then place
the other end under the magnetic drinks spout (16). Check that the button of the system's cover is set to the Latte
recipe position
(17).
Cappuccino Preparation
When the screen displays the drinks selection menu, press the button corresponding to the cappuccino recipe. You
may select the time of the milk frothing phase as well as the coffee volume. Once the settings have been validated
by pressing OK, the preparation of the recipe starts, a pre-heating phase occurs, then the milk frothing and lastly the
delivery of the espresso. Your drink is ready for you to enjoy (18).
Latte Bueno Preparation
This drink is prepared by reversing the steps for making a cappuccino, i.e. the delivery of the coffee comes first,
followed by the frothed milk.
When the screen displays the drinks selection menu, press the button corresponding to the latte bueno recipe. You
may select the time of the milk frothing phase as well as the coffee volume. Once the settings have been validated,
the preparation of the recipe is launched, and the machine will first perform an espresso cycle, and then a milk frothing
cycle. Your drink is ready for you to enjoy.
A message appears on the screen for system cleaning. We recommend that you perform it by referring to the OTC
(One Touch Cappuccino) SYSTEM RINSE and/or OTC SYSTEM MANUAL MAINTENANCE paragraphs.
FAVOURITES
The machine enables users to create 3 favourites. It is possible to have larger favourites library on your application and
to download your desired 3 favourites on your machine.
Creating Favourites
There are many ways to create your favourite. You may either create it from the application, or create it from the
machine.
From the application, simply go to the "My Preferences" menu and select the desired recipe, configure it according to
your personal taste and name it. It is then possible to download it on your machine by sliding the resulting icon onto 1
of 3 hearts
.
From the machine, you may create favourites in several ways:
„ either at the completion of a recipe that you enjoy by pressing the
icon and then assigning it the desired heart.
„ or by pressing the heart icon in the home menu
and following the instructions.
„ or by going to the Settings menu, favourites and selecting the function "Modify a favourite".
Managing Favourites
Users can manage these favourites via the application by sliding the favourites library icons onto one of the 3 hearts.
From the machine, users can modify a favourite by holding down (pressing for more than 3 seconds) a favourite on the
home page or by going to the settings menu, favourites and then selecting the "Modify a favourite" function.
Finally, users can also delete a favourite by going to the settings menu, favourites and then selecting the "Delete a
favourite" function.
32

Publicité

Table des Matières
loading

Table des Matières