Removing The Side Panels; Installing The Motherboard; Installing The Psu - Corsair CARBIDE Série Guide D'installation

SPEC-01

1. Removing the Side Panels

It's time to build a computer,
but don't worry, we've done
everything we can to make
this stress-free. To begin,
easily access the inside of the
case by removing the rear
thumbscrews and pulling out
the side panel(s).

2. Installing the Motherboard

Insert the motherboard's I/O
shield backplate into the case.
Before lowering the
motherboard into the case,
the motherboard mount holes
and the case's hex-shaped
AIR240 STEP1
standoffs (spacers) must align
accordingly. The stand-offs
are pre-mounted inside. You
can twist and remove them if
needed.
Anchor down the
motherboard with the
included motherboard screws.
5

3. Installing the PSU

On the other side of the case,
install the PSU under the drive
bays and ensure the fan faces
outward. Fasten screws to the
rear of the PSU to secure its
place in the case.
AIR240 STEP3
6