Removing The Side Panels; Installing The Motherboard; Installing A 5.25" Drive - Corsair CARBIDE Série Guide D'installation

CARBIDE SERIES
®
1. Removing the Side Panels (600C)
Pull the latch to release the
acrylic side panel, then lift the
panel off of the hinge.
1. Removing the Side Panels (600Q)
Remove the thumbscrews
600C STEP1
and tilt the side panel out.
9
600

2. Installing the Motherboard

Snap your motherboard's I/O
shield into the cutout.
Align the motherboard with the
standoffs in the case.
Secure with the included
screws.
b
600C_600Q Step 3

3. Installing a 5.25" drive

1. Open the front door.
2. Remove the 5.25"
bay shield.
600C_600Q STEP2
3. Insert the 5.25" drive into
the drive bay from the front
until the tool-free latch clicks,
securing the drive.
Note: To remove your drive, push the
tool-free tab to release the drive
and slide it out of the front.
10