iSi Thermo Xpress Whip PLUS. Mode D'emploi page 24

Cleaning.
WARNING: Check the material compatibility
of the cleaning/disinfectant solution used
before cleaning (see "Material List")!
NOTE: Pay close attention to ensure that the
correct cleaning solution or combined dis-
infectant and cleaning solution is used. The
reaction time and the selected temperature
are crucial for proper cleaning results.
Thorough Cleaning
NOTE: Please observe the illustrations on
cleaning.
1. Operate the lever until the device is
completely empty and depressurized.
2. Unscrew the lever.
3. Unscrew the push button and unscrew the
device head.
NOTE: It is essential to remove the push
button for thorough cleaning.
4. Disassemble the iSi Thermo XPress Whip plus
into the individual product components.
5. Rinse the product components with warm
(not hot!) drinking water and a commercial
cleaning agent and clean the device head,
riser tube, decorator tip and nozzle adapter
with the cleaning brush. Fully remove any
fat or protein residues.
NOTE: Never use special stainless steel
cleaning agents, scouring agents or abrasive
sponges/brushes.
6. Clean product components by hand or (and)
in the dishwasher.
NOTE: Maximum cleaning temperature for
manual cleaning is 50 °C / 122 °F.
14