Pioneer ELITE SC-LX501 Manuel De Base page 18

> Before start > Hookup
1 Analog audio cable, 2 Speaker cable
18
> Setup > Playback
2
1
LINE
IN
ZONE2 PRE/LINE OUT
> Part Names
ZONE 2 PRE/LINE OUT /
ZONE SPEAKER
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the
separate room (ZONE 2).
Connections with an AV component
Connect with HDMI IN 1 to 3 if you want to output an
external AV component to ZONE 2. If the AV component
doesn't have an HDMI jack, connect using a digital optical
cable, digital coaxial cable, or analog audio cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room. Connect
MAIN ROOM
the ZONE 2 PRE/LINE OUT jacks of the unit and the
LINE IN jacks of the pre-main amplifier or the power
amplifier in a separate room with an analog audio cable.
ZONE2
ZONE SPEAKER
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 During ZONE 2 playback, no sound is heard from the surround
back speakers or the height speakers and a maximum of 5.1
channel playback is possible in the main room. Listening modes
such as the Dolby Atmos modes cannot be selected.
0 Note that sound is not output from Speaker B when
Zone Speaker is used.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (
ZONE SPEAKER 0 The audio from externally connected AV
components can only be played in ZONE 2 when the
audio is analog or 2ch PCM audio. If you have
connected to this unit with an HDMI cable or digital
optical/coaxial cable, may be necessary to convert the
audio output of the AV component to PCM output.
P21) to enjoy this feature.
