Pioneer ELITE SC-LX501 Manuel De Base page 6

> Before start > Hookup
1 6
(  P3)
9 :
Height Speakers
Choose one of the following:
$
Top Front Speakers
$
Top Middle Speakers
$
Top Rear Speakers
6
> Setup > Playback > Part Names
For 7.1-Channel System
(with Height Speaker-B)
Ceiling speakers
This is a basic 5.1-channel system using ceiling speakers, for example, with
the addition of height speakers, either as top front speakers, top middle
speakers, or top rear speakers. Select which speakers to setup according to
the environment of the room. You can select the Dolby Atmos listening mode
(5.1.2 channel playback), which realizes the most up-to-date 3D surround
sound including overhead sounds, when the input format is Dolby Atmos. With
formats other than Dolby Atmos, you can still create a sound field by
outputting sound from the height speakers when you select the Dolby
Surround listening mode. Fit top front speakers on the ceiling forward of the
seating position, top middle speakers on the ceiling directly above the seating
position, and top rear speakers on the ceiling behind the seating position. The
distance between each pair should match the distance between the two front
speakers.
0 Dolby Laboratories recommends placing this type of height speakers to
obtain the best Dolby Atmos effect.
Go To "Hookup" ( P10)

＊2
＊1
＊ 1: 30e to 55e, ＊ 2: 65e to 100e, ＊ 3: 125e to 150e
＊3