Display - Pioneer ELITE SC-LX501 Manuel De Base

> Before start > Hookup
microphone is connected.
23.PHASE CONTROL button: This turns on or off the Phase
Control that corrects phase disturbance in the low range
to enhance the bass.
24.USB port: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5V/1A) to USB devices with a
USB cable.
25.AUX INPUT HDMI jack: Connect to a video camera, etc.,
using a HDMI cable.
26.DIMMER button: You can adjust the brightness of the
display in four steps.
27.Front flap
> Setup > Playback

Display

1 2 3
8
1. Lights when operating the "NET", "USB" input selector indicating
remote controller cursor operations are possible in screens showing
list of tracks, for example.
2. Lights in the following conditions.
Z2: When ZONE 2 is on.
: When connected by BLUETOOTH.
: When connected by Wi-Fi.
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network
is not correct.
USB: When "USB" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the
USB is not properly connected.
HDMI: When HDMI signals are input and the HDMI input is selected.
DIGITAL: When digital signals are input and the digital input is
selected.
3. Lights according to the type of input digital audio signals and the
listening mode.
4. Lights in the following conditions.
RDS (European and Asian models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
STEREO: Receiving FM stereo.
SLEEP: When the sleep timer is set.
AUTO STBY: When Auto Standby function is enabled.
5. The currently selected speaker system lights.
6. Lights when headphones are connected.
7. Flashes when muting is on.
8. Displays various information of the input signals. Characters that
cannot be displayed on this unit are replaced with asterisks ( ＊ ).
9. Lights when adjusting the volume.
10.Speaker/Channel display: Displays the output channel that
corresponds to the selected listening mode.
> Part Names
4 5 6 7
9 10
En
29