Pioneer ELITE SC-LX501 Manuel De Base page 16

> Before start > Hookup
CD
1 Digital coaxial cable, 2 Analog audio cable
16
> Setup > Playback
1
OR
2
> Part Names
if you have:
Audio Components
Example of a connection with an audio component.
Connect a CD player using a digital coaxial cable or
analog audio cable. You can also connect a turntable that
has an MM-type cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it
to an AUDIO IN jack other than the PHONO jack.
Further, if the turntable uses an MC type cartridge,
install an audio equalizer compatible with the MC type
cartridge between the unit and the turntable, then
connect to any AUDIO IN jack other than the PHONO
jack.
If the turntable has a ground wire, connect it to the SIGNAL GND
terminal of this unit.
Turntable