Before Start; What's In The Box; Main Features - Pioneer ELITE SC-LX501 Manuel De Base

> Before start > Hookup
1
2 3
5 6
2
> Setup > Playback

What's in the box

1. Main unit
3. Indoor FM antenna ×1
6. Power cord ×1

Main features

This unit features a Direct Energy HD Amplifier (Class D amplifier) that was developed using the latest digital
amplifier technology. It is capable of simultaneous high-power output and very high quality sound. This amplifier
provides you with the optimum playback of the latest multi-channel digital content.
$
You can connect 7.1ch of speakers to this unit, with 7ch at 180 W (6 ohms, 1 kHz, 0.9%THD) (North American
models) / 180 W (6 ohms, 1 kHz, 1%THD) (European and Asian models) per channel plus pre out jack for
powered subwoofer.
$
Supports playback in Dolby Atmos format which provides 360e sound placement
$
The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT MAIN/SUB support HDCP2.2
$
HDMI CEC functionality: Control features such as linking input switching with the input selector and players
conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-
compliant TV, and automatically switching this unit to standby when the TV is turned off
$
HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this
unit is in standby
$
ARC: Connection with an ARC-compatible TV is complete with one HDMI cable
$
Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV
$
Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server
that enables PC music file playback, USB playback, plus other playback features such as AM/FM radio and
BLUETOOTH
$
Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source
$
Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2)
$
You can connect a speaker B system
$
Equipped with RS-232C port, IR IN/OUT jack, and 12V TRIGGER OUT jacks
4
$
We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to our
website for more information.
CAUTION: Connect speakers with 4 Ω to 16 Ω impedance. The power cord must be connected only after
all other cable connections are completed.
0 We will not accept responsibility for damage arising from the connection of equipment manufactured by
other companies.
> Part Names
2. Remote controller (RC-914R) ×1, Batteries (AAA/R03) ×2
4. AM loop antenna ×1 5. Speaker setup microphone ×1
®
play