Selecting And Preparing Weld Output Cables - Miller SRH-444 Manuel D'utilisation

5-3. Selecting And Preparing Weld Output Cables

Notes
2
3
2 1
10 ft (3 m)
10 ft (3 m)
1
Determine total cable length in weld
circuit and maximum welding am-
peres. See Section 5-4 to select
proper cable size.
Use shortest cables possible.
Do not use damaged cables.
2
Use lugs of proper amperage
5
capacity and hole size for connect-
ing to work clamp, electrode holder,
and weld output terminals.
3
Install according to manufacturer's
instructions.
4
4
Install onto work cable.
5
Tools Needed:
Weld Output Cable
Terminal Lug
Insulated Electrode Holder
Work Clamp
Example: Total Cable Length
In Weld Circuit = 20 ft. (6 m)
sb6.1 11/92 − S-0653
OM-2230 Page 15