Preparing The Blender For Use; Using The Blender - KitchenAid KSB13 Série Mode D'emploi

PREPARING AND USING THE BLENDER

PREPARING THE BLENDER FOR USE

Before using your Blender for the first time, wipe clean Blender base with a warm damp cloth.
Dry with a soft cloth. Wash Blender Jar, Lid, and Lid Center Cap in warm, sudsy water (see
"Care and Cleaning" section). Rinse parts and wipe dry. Be sure the countertop beneath the
Blender and surrounding areas are dry and clean.
When moving your Blender, always support/lift from the Blender base. The
IMPORTANT:
Base will become disengaged from Jar if carried by Blender Jar or Blender Jar handle only.

USING THE BLENDER

1
2
3
4
5
Slot
Place the Blender Jar by using provided slot, so that
the handle of the Jar will be towards the Control Dial.
Make sure that it is fully seated in the Base.
Place the ingredients into jar. Add liquids first, then
soft foods, then leafy greens, and ice or frozen items
last.
NOTE: Do not fill Blender Jar past the top-most
measurement mark.
Firmly, secure Lid and Lid Center Cap in the Jar.
Before operating the Blender, make sure the Jar is
properly positioned on the Blender base.
Then, plug the Blender into a grounded outlet.
Turn the Control Dial from (O) to desired speed for
continuous operation. You may change desired speed
by turning the Control Dial at any time.
See the "Blender Function Guide" for more
information.
If blending hot liquids or ingredients, only use the full
size blender jar (48 oz / 1.4 L). Place the Lid securely on
the jar and the Center Cap locked in place.
It is recommended to operate only on speed (1) while
blending hot liquid or food.
PREPARING AND USING THE BLENDER | 5