KitchenAid KSB13 Série Mode D'emploi page 8

PREPARING AND USING THE SMALL BATCH
JAR
2
3
4
PREPARING AND USING THE CITRUS PRESS
PREPARING THE CITRUS PRESS FOR USE
Before using your Citrus Press for the first time, wash Reamer, Pulp Basket and Juice Container
in warm, sudsy water. Rinse parts and wipe dry. Wipe clean the Gear Assembly with a warm,
damp cloth and dry with a soft cloth (see "Care and Cleaning" section).
Be sure the countertop beneath the Blender and surrounding areas are dry and clean.
USING THE CITRUS PRESS
2
1
Drive
Shaft
2
8 | PREPARING AND USING THE CITRUS PRESS
Secure the Blade Assembly on Small Batch Jar and
rotate it clockwise until it is tight.
Place it on the Blender base, making sure that it is fully
seated in the Base.
Turn the Control Dial from (O) to desired speed for
continuous operation. You may change desired speed
by turning the Control Dial at any time. See the
"Blender Function Guide" for more information.
When finished, turn the Blender off by returning
Control Dial to (O).
Unplug Blender from electrical outlet.
NOTE: Always hold and raise the Small Batch Jar
with Blade Assembly from the Blender base.
Place the Gear Assembly on the Blender base, making
sure that it is fully seated in the Base.
1
Place the Juice Container on the Gear Assembly and
twist clockwise to lock in place.
Place the Pulp Basket and then the Reamer into the
Juice Container. Align them with the Drive Shaft.