KitchenAid KSB13 Série Mode D'emploi page 6

PREPARING AND USING THE BLENDER
6
IMPORTANT: Allow the Blender to fully stop before removing the Lid, Blender Jar, or pouring
out your blended ingredients.
USING PULSE MODE/ICE CRUSH MODE
Your Blender offers a Pulse/Ice Crush function with a soft start to avoid ingredient splatter.
When turning the Control Dial to the Pulse/Ice Crush (
at optimal speed to crush ice. This function will continue until you release the Control Dial,
returning to (O).
1
2
TIP: Use half of standard ice cube tray or 7-8 standard ice cubes at a time for blending.
The Ice Crush feature has been optimized to crush and chop ice without adding any liquid
ingredients.
PREPARING AND USING THE PERSONAL JAR
PREPARING THE PERSONAL JAR FOR USE
The Personal Jar is the perfect size and handy to carry with you on the go.
Before using your Personal Jar for the first time, wash Jar, Lids, and Blade Assembly in
warm, sudsy water (see "Care and Cleaning" section). Rinse parts and wipe dry. Be sure the
countertop beneath the Blender and surrounding areas are dry and clean.
IMPORTANT: Do not blend hot liquids and ingredients in the Personal Jar.
6 | PREPARING AND USING THE PERSONAL JAR
When finished, turn the Blender off by returning
Control Dial to (O).
Unplug the Blender before removing the Blender Jar.
P
Place ingredients or Ice cubes into the Blender Jar.
Firmly secure Lid with Lid Center Cap on Blender Jar.
Turn and hold the Control Dial from (O) to Pulse/Ice
P
Crush ( ) function. The Blender will run at optimal
ice crush speed. When finished, release the Control
Dial to stop the Blender.
You may hold Control Dial on Pulse/Ice Crush (
function as per desired interval of time. See "Blender
Function Guide" for more information.
) function, the Blender will operate
P
)