Preparing The Blender For Use - KitchenAid Pro Line Serie Mode D'emploi

USING THE BLENDER

PREPARING THE BLENDER FOR USE

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Before using the Blender, be sure
the countertop beneath the Blender
1
and surrounding areas are dry and
clean. Then, plug the Blender into
a grounded 3 prong outlet.
FOR DETAILED INFORMATION ON USING THE BLENDER
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes,
and tips on how to use your Blender.
6 | USING THE BLENDER
Before first use
Before using your Blender for the first time,
wipe the blender base with a warm damp
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash the blender
jar, lid, Flex Edge tamper and ingredient-
measuring cap in warm, sudsy water (see
"Care and cleaning" section). Rinse parts
and wipe dry.
The main power switch is on the back
of the blender base. Flip the POWER
switch to the On position. The status
2
indicator light above the start toggle
button will begin to flash, indicating
that the Blender is in Standby mode.
The Blender is now ready to operate.