Fein WSG8-115 Série Mode D'emploi page 30

OBJ_BUCH-0000000224-002.book Page 30 Tuesday, February 23, 2016 10:09 AM
en
30
Provided accessories (figure 17).
Selection of accessories (figure 18).
Use only original FEIN accessories. The accessories must be intended for the power tool type.
A Grinding disc, flap disc
(use only with mounted wheel guard)
B Cutting disc
(use only with mounted cut-off wheel guard)
C Steel wire brush, fleece backing pad
D Backing pad for fibre sanding sheets, fibre sanding sheets
(mount only with the provided backing-pad clamping unit; use only with mounted hand
guard or wheel guard)
E Steel tapered twist brush
F Backing pad with Velcro, Velcro sanding sheets, sanding fleece with Velcro attachment,
sponges
(use only with mounted hand guard)
G Steel cup brush, round twist brushes
(use only with mounted hand guard)
Auxiliary handle
Face spanner
Threaded flange
Clamping flange
Wheel guard
Fig. 17