Fein WSG8-115 Série Mode D'emploi page 24

OBJ_BUCH-0000000224-002.book Page 24 Tuesday, February 23, 2016 10:09 AM
en
24
Adjustments.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Adjusting the wheel guard (figure 8).
Release clamping lever.
Turn the wheel guard to the requested work-
ing position, then clamp the wheel guard with
the clamping lever.
Allow the clamping lever to engage.
Fig. 8
1.
2.
Clamping lever