KTM 63506915144 Mode D'emploi page 26

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5 ASSEMBLY
5.1
8
Assembly
Info
Use of the vehicle under difficult conditions, e.g. in heavy rain, high temperatures, or sandy or dusty envi-
ronments, can result in significantly increased wear. For this reason, it may be necessary to inspect or
replace parts before the next scheduled service.
Info
This air filter can be washed and can therefore be reused (see Chapter 6).
It is recommended that the air filter box be cleaned regularly in extreme conditions.
502198-01
502199-01
502200-01
Condition
The air filter kit can only be installed with the one-piece seat.
Preliminary work
Take off the seat (see Owner's Manual).
Remove the side cover on the left (see Owner's Manual).
Remove the right side cover (see Owner's Manual).
Assembly
bl
Remove screws
, pull out the rear cross brace and hang it
to the side.
Info
Protect the frame and components against damage.
bm
Remove screws
.
Remove the air filter box cover and detach the wiring harness
from the attachment.
Info
The cover is not reused.
Remove air filter clamping wedge
bn
upward.

Publicité

Table des Matières
loading

Table des Matières