Declaration Of Conformity - HP LaserJet 9040 Guide De Mise En Route

Masquer les pouces Voir aussi pour LaserJet 9040:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Declaration of Conformity

Manufacturer's
Name:
Manufacturer's
Address:
declares, that the product
conforms to the following Product Specifications:
SAFETY:
EMC:
Supplementary Information:
For Regulatory Topics only, contact:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria
3130, Australia.
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-
TRE / Standards Europe, Herrenberger Straße 140, D-71034 Böblingen (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-
0015 (Phone: 208-396-6000)
34
Printer Setup
according to ISO/IEC Guide 22 and EN 45014
Hewlett-Packard Company
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
Product Name:
HP LaserJet 9040/9050 printer
Including optional accessory 2000-sheet input tray (C8531A)
Regulatory Model
3)
BOISB-0403-00
Number
Product Options:
ALL
IEC 60950:1999 / EN60950: 2000
IEC 60825-1:1993+A1+A2 / EN 60825-1:1994+A11+A2 (Class 1 Laser/LED Product)
GB4943-2001
CISPR 22:1997 / EN 55022:1998 - Class B
EN 61000-3-2:2000
EN 61000-3-3:1995 + A1:2001
EN 55024:1998/A1:2001
FCC Title 47 CFR, Part 15 Class B
GB9254-1998, GB17625.1-2003
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low
Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer
Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two
Conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation
3) For regulatory purposes, this product is assigned a Regulatory model number. This number
should not be confused with the product name or product number(s).
1)
2)
/ ICES-003, Issue 4
Boise, Idaho USA
October 26,2004
ENWW

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Laserjet 9050

Table des Matières