Installations According To Ul/Csa Standards - Stahl EC-94 Série Manuel D'instructions

7.5.1 Installations according to UL/CSA
standards
Pay attention not to damage the
conductors and the boards.
For installations according to UL/CSA standards, the
cables for Ethernet, reset alarms, relays and fibre
optics should be inserted in the right cables entry as
indicated in the following figure (Fig. 16, page 102).
Fig. 16
In installations according to UL/CSA standards,
installation is compulsory of the separation barrier
provided.
Having inserted all the connectors and before
powering the device, install the separation barrier
supplied.
Fasten the barrier (01) using the specific screws and
washers (02) to the prepared spacers (03) (Fig. 17,
page 102 and Fig. 18, page 102).
20
Fig. 17
Fig. 18
03
01
02
MNTCMPXHDC_2038_EN