Power Off - ECOVACS ROBOTICS DEEBOT SLIM2 Manuel D'instructions

3. Operating and Programming
6 Start
Press the AUTO Mode Button on DEEBOT or
the START/PAUSE button
Control. DEEBOT starts to work immediately in
AUTO Cleaning Mode.
To c h o o s e a n o t h e r C l e a n i n g M o d e ,
*
please refer to section 3.3 Cleaning Mode
Selection for details.
DEEBOT can be directed using the Direction
*
Control Buttons on the Remote Control when
it is Paused.
7 Pause
Pause DEEBOT by pressing the AUTO Mode
Button on DEEBOT or the START/ PAUSE
Button on the Remote Control.
* The AUTO Mode Button on the robot's
Control Panel stops glowing after the robot
is paused for more than 10 minutes. Press
AUTO Mode Button on the robot or press
any button on the Remote Control to wake
up the robot.
8

Power OFF

Pause DEEBOT. Move the Bottom Power
Switch to the OFF position.
* When DEEBOT is not cleaning, it is
suggested to keep it powered ON and
charging.
12
EN
on the Remote