Power Off; Cleaning Mode Selection - ECOVACS ROBOTICS Deebot M80 Pro Manuel De L'utilisateur

9

Power OFF

Pause DEEBOT. Press and hold the
the robot. DEEBOT is powered OFF when the
button stops glowing.
* When DEEBOT is not cleaning, it is suggested
to keep it powered ON and charging instead of
powered OFF.

3.3 Cleaning Mode Selection

DEEBOT has several cleaning modes to choose from to effectively clean different floors. Cleaning
modes are selected using the Remote Control or ECOVACS App. For more information on the
ECOVACS App, see the separate ECOVACS Quick Start Guide.
1 AUTO Cleaning Mode
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans
in a straight line and changes direction
when it meets an obstacle.
* To start AUTO Cleaning Mode, press
the AUTO Mode Button on the robot, or
on the App main screen.
3. Operating and Programming
button on
Intensive Cleaning Mode
2
This mode is good for aggressive cleaning
or for extremely dirty or dusty floors. To
start Intensive Cleaning, press the Intensive
Cleaning Button on the Remote Control.
In this mode, DEEBOT follows the same
cleaning pattern as Automatic Cleaning
Mode, but with stronger suction power
and higher Main Brush rotating speed and
performs a more thorough cleaning.
3 3
OFF
13
FR-CA
EN