ECOVACS ROBOTICS DEEBOT SLIM2 Manuel D'instructions page 23

No. Malfunction
Intelligent Scheduling function is
cancelled.
DEEBOT is powered OFF.
DEEBOT
will not clean
The robot's battery is low.
4 automatically
at scheduled
time.
The robot's Suction Intake is
blocked and/or its components
are tangled with debris.
The batteries in the Remote
Control need to be replaced.
DEEBOT is powered OFF or the
robot's battery is low.
Remote
Control failure
The infrared signal cannot be
(effective
transmitted because the Infrared
5 control range
Emitter on Remote Control or the
of Remote
Infrared Receiver on DEEBOT is
Control is 5m
dirty.
(16').
There is other equipment
interfering with the infrared signal
to DEEBOT.
Possible Causes
5. Troubleshooting
Solutions
Please refer to section 3.4 Intelligent
Scheduling for details.
Power ON DEEBOT.
Keep DEEBOT powered ON and on
the Charging Dock to make sure it has
full battery to work at any time.
Turn the robot's power OFF, clean the
Dust Bin and invert the robot. Clean
the robot's Suction Intake and Side
Brushes.
Replace with new batteries making
sure they are installed correctly.
Make sure DEEBOT is powered ON
and fully charged.
Use clean dry cloth to wipe the Infrared
Emitter on Remote Control and the
Infrared Receiver on DEEBOT.
Avoid using the Remote Control near
other equipment using infrared signals.
21
EN