Instructions To Use - CONTINENTAL EDISON CERA432DIX Guide D'utilisation

BEFORE USE
• Remove all packaging, including the foam holder at the bottom of the
refrigerator and the adhesive tapes that attach the accessories to the
box.
• Place the refrigerator in the correct position and adjust the feet to the
correct level.
• It is best to clean the refrigerator before using it.
• Remove the film: There is a layer of clear film on the panels of your
product that can protect the products from scratches during
manufacture and transportation. You can choose to keep or remove
the film as needed.
• Place the refrigerator and adjust the level, clean it, let the refrigerator
sit for 8 hours, then turn it on to check that the refrigerator is
operating normally.
STARTING AND ADJUSTING FUNCTIONS
Start-up
• Plug in the power cord.
• At first start, the display shows the default temperature values (the
refrigeration compartment temperature is set to 5 ° C, the freezer
compartment temperature to -18 ° C)
Setting the functions of the LED display
The default mode is Power Save Mode at startup: The display turns on
for 20 seconds and then turns off.
This mode saves energy and extends the life of the LEDs.
V. INSTRUCTIONS TO USE
EN-22