CONTINENTAL EDISON CERA432DIX Guide D'utilisation page 62

ADJUSTMENT OF PLASTIC FEET
When the refrigerator is in its packaging,
•
the plastic feet are tight. After removing the
refrigerator
installation, be sure to adjust both front feet
until the height is adequate; just adjust
them with a wrench or by hand.
Plastic feet and rear rollers should touch
•
the floor to prevent the refrigerator from
moving, vibrating, or making noise.
When moving the refrigerator, adjust the
•
plastic feet counterclockwise to remove
them from the floor, and then gently push
the refrigerator to move it.
EN-20
from its packaging for