Forch 5370 200 Mode D'emploi page 26

General safety instructions and individual safeness
Attention
• You need to read, understand and follow the complete instruction manual
and the safety briefi ng BEFORE USE. Afterwards the instruction needs
to be kept at a adequate place, accessible for any user.
• The unit may only be used, cleaned and maintained by persons who
understand and follow this instruction. The operator must be in physically
condition to utilize the tool.
• Improper use or unauthorized modifi cation will cause serious health
damage by yourself, somebody else or animals and other property.
• Individual safety instructions from the related countries needs to be
observed additional.
• Make sure that the tool is out of range for children or other persons who
are not familiar with the handling of the unit. Switching on the device by
such persons is dangerous.
Workplace hazards:
• Slipping, stumbling or collapsing are the main reasons for serious or deadly accidents.
Take care for hoses which maybe are in the near operating area.
• Maintain a balanced body position and secure footing.
• Cyclic courses of movements, inappropriate posture and constant vibrations will cause
fatigue to arms, hands and body.
• High sound levels can lead to permanent hearing loss. Use hearing protection as
recommended.
• Avoid breathing in dust or handling debris from work process which can be harmful to
your health.
• This tool may only be used and maintained by qualifi ed people who are in the
constitutional position to handle the dimension, weight and force of the device.
• This tool is not intended for use in explosive atmospheres and is not insulated for
contact with electrical power sources.
• Please consider that the material your tool is made of always can have material
tiredness.
Projectile hazards:
• Even small projectiles, for example swirled by the outlet air of your tool, can injure eyes
and lead to blindness.
• Always wear impact-resistant eye and face protection when involved with or near the
operation, repair or maintenance of the tool or changing accessories on the tool.
• Also take care that people surrounding you will follow the instruction to wear
impact-resistant eye goggles and face masks.
• Only use accessories which is convenient to the tool in dimension and technical
requirement.
• In case of a male function switch off the device immediately and provide the tool to a
authorized service station to check.
• If you recognize high unusual vibration switch of the unit and look for the reasons. Do
not switch on again until before the problem is solved.
Individual safeness
• Only use the tool in well-rested conditions.
• Always take care what you are doing and use your commonsense.
• Do not use the tool when you are tired or under the infl uence of medicine, alcohol or