Spare Parts; Declaration Of Conformity - Würth GS 700-E Traduction Des Instructions De Service D'origine

Spare parts

In the unlikely event of a failure or defect, have
the device repaired by a Würth masterService
workshop.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device.
The current spare parts list of this device can be
viewed online at "http://www.wuerth.com/parts-
manager". Alternatively, contact your local Würth
agency for a hardcopy.
Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognised only if the device is in a
non-disassembled state and presented to a Würth
branch office, your Würth sales representative or a
customer service office authorized by Würth.
Technical changes reserved.
We accept no liability for printing errors.
Disposal
Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmen-
tally friendly manner.
22

Declaration of Conformity

We herewith declare that this product conforms with
the following standards and directives:
Standards
• EN 60745
in accordance with the regulations stipulated in the
directives:
EC directive
• 2004/108/EC
• 2006/95/EC
• 2011/65/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
General Manager
Adolf Würth
GmbH & Co. KG
Künzelsau: 22.05.2013
General Manager