Installing The Motor Housing - Kichler 300032 Manuel D'instructions

INSTALLING THE MOTOR HOUSING

Step 1. Place motor housing up to the mounting plate cover,
attach three hang tags with screws on the motor housing to the
key holes on the mounting plate cover. (Fig. 12a)
Step 2. Twist the motor housing clockwise until three screws lock
at the end of the slotted holes. (Fig. 12b)
WARNING: Ensure you complete above steps correctly and
follow all steps. Failure to do that, might cause the fan to fall.
Fig. 12a
48" Volos LED | 11
Mounting
Plate Cover
Motor
Housing
Fig. 12b