How To Determine The Device Version Number In User Mode; How To Create An Admin Pin - iStorage datashur PRO Manuel D'utilisation

10. How to determine the device Version Number in User mode

To display the device Version Number of the datAshur PRO do the following.
Instructions
1. Unlock the datAshur PRO with User PIN
2. Enable Options by pressing the KEY button 3 times -
treble click
3. Within 10 seconds begin to Press button number 8
(tuV) followed by the number 6 (mNo) button - (86)
4. Press KEY button once
For example, if the revision number is '1.11', the
times. Once the sequence has ended the Red,

11. How to create an Admin PIN

An Admin PIN is a useful feature for corporate deployment, for example:
• Recovering data from a drive and configuring a new User PIN in the event an employee has forgotten their PIN
• Retrieving data from a drive if an employee leaves the company
• Setting policies such as 'Read-Only'
• The Admin PIN can be used to override all User settings
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
LED
&
&
Red LED will blink once (1) and the
Green & Blue LED's will blink together once and then to solid Green.
www.istorage-uk.com
LED State
Red solid LED changing to
indicating successful User PIN entry
Green and Blue LED's blinking together
awaiting new instructions in OPTIONS mode.
Green and Blue LED's continue to blink together
Red, Green & Blue LED's will quickly blink
together once followed by the
to the most significant digit of revision and
the Green LED will blink according to the least
significant digit of the revision number
Green LED will blink eleven (11)
Green solid LED
Red LED blinking
#11